Petersen Corrosion Resistant Dee Shackle with Safety Pin

Manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316).
Excellent for lifting applications where a high level of corrosion resistance
is required.
Factor of Safety 6:1.
Available with 2 pin types – E Type Safety Pin with Standard Nut (E Type) or
Nyloc Nut (E Type-NY).
Special design of bolt ensures the nut is positioned correctly allowing
sufficient room for the cotter pin.

Every shackle is proof tested to 2 x WLL and certified at the Petersen manufacturing facility in the North East of England.
All shackles are manufactured in accordance with the Machine Directive
2006/42/EC Inspection certificate BS EN 10204 3.1b available on request.
High quality finish and excellent polish.
Manufactured using the latest technology in electrical upset forging.

Find Petersen Corrosion Resistant Dee Shackle with Safety Pin on page 122 of the Bridco Catalogue (PDF).

Dimensions and Working Load Limit (WLL)

Part Number WLL
Jaw Gap
*ED8M8 0.5 M8 Bolt 8.0 16.0 32.0 0.075
*ED10M10 0.8 M10 Bolt 9.5 19.0 38.0 0.136
*ED11M12 1.0 M12 Bolt 11.5 22.0 44.0 0.212
*ED12M12 1.25 M12 Bolt 12.7 26.0 52.0 0.331
*ED14M16 1.8 M16 Bolt 14.3 29.0 58.0 0.585
*ED16M20 2.8 M20 Bolt 16.0 32.0 64.0 0.760
*ED19M22 3.3 M22 Bolt 19.0 38.0 76.0 1.18
*ED22M24 4.5 M24 Bolt 22.0 44.0 88.0 1.75
PE-ED25M27 5.0 M27 Bolt 25.4 50.0 100.0 2.60

*Not stocked. Available on Request.

Typical Applications
Water utility installations and other corrosive facilities
Pump chains and pump lifting
Chemical installations – Chlorine plants etc
General lifting in off-shore applications
General lifting and tethering in leisure marine applications
General lifting purposes

Number of Sizes


Page number in Catalogue



Grade 316 Stainless Steel